Produkty dla do silników (278)

Armaglass Connector L Preformed GFRP connector with improved adhesion surface, with "L" shape, 10 cm short side and long side available in different lengths, from 15 to 100 cm. Armaglass Connector L is used to mechanically connect ARMAGLASS networks to various supports (brick walls, stone walls, concrete, wood). The connector is perfectly compatible with the most common materials used for grouting, both resinous (epoxy, polyester, vinylester) and with mortars and grouts based on aerial or hydraulic binders. Armaglass Connector L is used to mechanically connect our ARMAGLASS networks to various supports (brick walls, stone walls, concrete, wood). It is an extremely durable connector, even when applied on alkaline supports, with high salt loads or when exposed to severe exposure environments. It is extremely easy to handle, light and easy to apply, which allows for rapid intervention and low installation costs. The improved adhesion allows optimal adhesions with resinous grouting matrices and with all the materials typical of ancient and modern masonry (brick, stone, mortar, concrete). Armaglass Connector L is part of the RINFOR SYSTEM 5 CRM reinforced plastering system, certified according to European evaluation EAD 340392-00-0104. Mechanical collaboration and connection of ARMAGLASS networks with supports. Reinforced plastering (CRM) interventions, even with high thickness, both on one side and on both sides of the masonry. Reinforcement of masonry arches and vaults. Reinforcement interventions on concrete structures. Particularly suitable for ancient walls of historical and cultural interest. Restoration and reinforcement interventions on buildings exposed to marine aerosol and offshore structures. Restoration and reinforcement interventions of water pipes, tanks, purifiers, piezometric towers, industrial water treatment tanks and in all structures that may be affected by the presence of aggressive soluble salts (chlorides, sulphates, nitrates, phosphates). Packaging: bulk - φ 8x70 mm Unit: €/piece

Per far fronte ad ogni esigenza del cliente nel settore metalmeccanico, GBM dispone di centri di lavoro a 3/4/5 assi per la realizzazione di piccole, medie e grandi produzioni.

Dall’idea al prodotto finito Grande esperienza al servizio del cliente I progettisti, avvalendosi di una lunga e diversificata esperienza maturata negli anni, sviluppano le attrezzature in stretta collaborazione con il cliente, offrendo una serie di servizi specializzati: – ANALISI DELLE ESIGENZE – CO-DESIGN – ENGINEERING L’ Ufficio Tecnico che vanta un altissimo livello di competenza ed un parco macchine sempre aggiornato, sa come progettare uno stampo su misura per i clienti che devono soddisfare specifiche richieste. Le lavorazioni eseguite ed i macchinari CAD/CAM impiegati consentono di realizzare stampi con un grado di precisione che soddisfa gli standard qualitativi più elevati. La Meroni F.lli progetta e realizza internamente tutta la gamma di prodotti, utilizzando software avanzati ed impiegando personale altamente qualificato per la costruzione di attrezzature per lo stampaggio a freddo, sia progressivo che tradizionale.

Przepływ wody i osadu pochodzącego z poprzednich faz oczyszczania (biologicznego lub fizyko-chemicznego) jest wprowadzany do strefy pośredniej zbiornika, tuż pod pakietem lamelowym. Pakiety lamelowe z ramą do usuwania osadu. Składają się z równoległokanałowego pakietu lamelowego ze sztywnego polistyrenu, stabilizowanego przed promieniowaniem UV, zamkniętego w ramie zabezpieczającej AISI 304; są one zwykle stosowane do modernizacji istniejących osadników lub do umieszczania w betonowych zbiornikach specjalnie zbudowanych w celu przechowywania pakietów lamelowych. SERIA F - L (powierzchnia równoważna 11,30 m2/m3) F - I SERIES (powierzchnia równoważna 14,90 m2/m3) F - S SERIES (powierzchnia równoważna 20,00 m2/m3) -Wysoka wydajność separacji ciał stałych od cieczy -Prostota instalacji i obsługi -Kompaktowe wykonanie -Niskie koszty początkowe i koszty zarządzania instalacją

E2 Normale con smussi per motore diesel - Segmenti di compressione a Milano

Pennello da radiatore Big in setola bionda naturale,adatto in ambito interno o esterno. misure disponibili 2"-2,5"-3". Disponibile anche in setola grigia o sintetica

(adatte al settore alimentare) Mescole utilizzate – shore 70 ± 5 NBR:colore grigio EPDM:colore nero SILICONE LIQUIDO LSR:colore rosso/bianco VITON®:colore azzurro

TS impellers are manufactured assembling airfoil profile blades with a light aluminum alloy hub. The impellers are thought to be employed in applications that require the highest rotation speeds. The impellers are available in configurations with 6/8/10/14/20 blades both for clockwise and anticlockwise rotation. TS blades are available in two models: G, and D, with right or left fixed setting angles ranging from 25° to 50°. TS impellers can produce a sucking or blowing air flow.

Pennello professionale prodotto con resina epossidica antisolvente. Setola naturale mista con setola oro ad altissima assorbenza. Adatto per vernici sintetiche e acriliche. Tenuta colore 40% in più della pura setola o di qualsiasi altra fibra sintetica, e durata all'abrasione quattro volte tanto la setola naturale. Stesura omogenea del colore. Si pulisce facilmente con acqua o solvente a seconda delle vernici usate. Manico anatomico bicomponente plastica/gomma totalmente antisolvente. Ghiera ramata.

Nomex-Kapton -Nomex (NKN) tubes are stator slot liner insulators produced with a low thickness of only 0,16 mm without overlaps. This means an improved thermal management inside the stator slot, less overheating inside, higher torque and motor efficiency, more space for copper hairpins & I-Pins, improved dielectric strength. Reducing the thickness of slot insulator and improving dielectric & thermal insulation is a key stone to improve motor efficiency and performance in terms of: 1. Improving thermal conductivity and reducing thermal resistance 2. Reducing the temperature of the copper hairpin hotspot 3. By reducing the insulator volume because of a reduced thickness and lack of overlaps; this means that the amount of copper inside the slot can be increased, improving motor performance 4. Reducing phase resistance Nomex and Kapton are DuPont registered trademarks

Tecnosida® realizza i propri impianti sulla base delle esigenze dei propri clienti. Per questo motivo, la realizzazione dei sistemi è preceduta da un attento sopralluogo tecnico svolto presso lo stabilimento del cliente da personale altamente specializzato. Questa operazione ci permette di offrire la migliore soluzione tecnica e proporre interessanti offerte economiche in grado di soddisfare realtà produttive molto diverse. Maggiori informazioni:https://www.tecnosida.it/1101/servizi-progettazione-engineering-impianti-ecologici-aria

Il metodo Airless garantisce una verniciatura ad altissima resa senza formazione di nebbia. Può capitare però, per problemi di logistica o contingenti, di avere necessità di operare con un’apparecchiatura completamente autonoma e non dipendente dalle linee elettriche. La pompa Airless serie Testarossa mod. Superdiecimila con motore a benzina soddisfa questa particolare esigenza. La macchina monta un motore Honda, per avere massima qualità ed assistenza, ed è abbinata al gruppo idraulico tramite un sistema a cinghia. Punto di forza della pompa Airless serie Testarossa mod. Superdiecimila a benzina è il suo raggio d’azione che arriva a 70 metri , sia in orizzontale che in prevalenza, permettendoti di non perdere tempo nel dover spostare la macchina durante l’utilizzo. I prodotti spruzzabili sono: smalti, vernici, antiruggine, primers, pitture lavabili, pitture silossaniche e al quarzo, tempere, incapsulanti per l’amianto, intumescenti, bicomponenti, resine epossidiche e molti altri.

Consilex Nanosil T-1000 An impregnating water-oil repellent that is colourless, non-film and based on the nano-dispersion of silicon compounds. Protects lime-based plasters, cement mortars, concrete, natural stones, bricks, wood and so on from the weather, frost and thaw cycles, and aggressive atmospheric conditions. It does not alter the colour of the support nor impact the original appearance or breathability. Product characterized by a very high pearling effect (lotus flower effect) and excellent durability. Consilex Nanosil T-1000 belongs to the new generation of water-soluble fluorinated silica compounds, characterised by zero emissions of VOCs and the absence of flammability and toxicity. The active substance penetrates the porosity and micro-lesions, adhering to the support and counteracting the penetration and advancement of liquids without blocking the breathability of the support. The special chemical structure of Consilex Nanosil T-1000 ensures its high stability to alkali and thus its durability over time on various types of supports, such as: lime-based plasters, cement mortars, concrete, brick, natural stone and wood. The product differs from other treatments on the market due to having the following characteristics: - non-flammable - non-film - zero VOC - stable in water - free from emulsifiers - environmentally-friendly The treatment of absorbent materials carried out with Consilex Nanosil T-1000 is characterised by: - durability over time - total transparency - no variations to the surface colour - excellent water vapour breathability - elevated pearl effect - resistance to acids and alkalis - resistance to UV rays - an absence of reactive by-products that are harmful to people and the environment An impregnating treatment that is water-oil repellent, non-film, totally transparent and colourless, for above-ground masonry in brick, marble, slate, limestone, natural stone and tuff, cement or brick flooring, lime- or cement-based plasters and mortars, etcetera. Packaging: 25 kg canister UM: €/kg

Deterg-A Concentrated solution of buffered acids, anionic and non-ionic surfactants with high biodegradability, for deep cleaning of substrates from various kinds of encrustations (lime, gypsum, calcareous concretions, saltpetre). To be applied after diluting with clean water according to the proportions indicated in the technical data sheet. The product attacks carbonate minerals, therefore pay particular attention to surfaces in marble, limestone, floors and lead polished stones, carrying out appropriate preventive assessments. Protect metal surfaces Operations of saline removal and stabilisation, removal of deposits of lime, gypsum, saltpetre, mosses; deep cleaning of leakages and media in general. Particularly suitable as a detergent in waterproofing interventions with Protech Balcony. Dilute the product in water based on the nature and size of the incrustation and/or of salt fouling to be removed. Spread the solution with a spray or brush, or even by pouring directly on the fouling to be removed. Leave on for a few minutes. Wash the foam produced by the acid reaction with copious amounts of water . Deterg-A can be used in various dilution ratios: from pure (undiluted) up to one part of product in 10 parts of water. In preparation of the supports to be waterproofed with Protech Balcony, consider diluting the product 1:4, for a consumption of 400 g/m² of solution. In this case, the consumption of Deterg-A is about 1 litre of product to dilute per 10 sqm of tiled surface to be waterproofed. Do not apply on marble surfaces, terracotta, natural stone, polished lead floors and galvanised surfaces. It is a corrosive product, pay attention to the security fact sheet. Always wear gloves when handling. Packaging: 6 kg can UM: €/kg

Prerit Surface An impregnating water-oil repellent that is colourless, non-film and based on the nano-dispersion of silicon compounds. Protects washed gravel floors from the weather, frost and thaw cycles, and aggressive atmospheric conditions. It does not alter the colour of the support nor impact the original appearance or breathability. Also to be used, as a stain prevention during the washing operations of the surface to be deactivated, on the artifacts around the architectural flooring. Prerit Surface belongs to the new generation of water-soluble fluorinated silica compounds, characterised by zero emissions of VOCs and the absence of flammability and toxicity. The active substance penetrates the porosity, adhering to the support and counteracting the penetration and advancement of liquids without blocking the breathability of the support. The special chemical structure of Prerit Surface ensures its high stability to alkali and thus its durability over time. The product differs from other treatments on the market due to having the following characteristics: - non-flammable - non-film - zero VOC - stable in water - free from emulsifiers - environmentally-friendly - durability over time - total transparency - no variations to the surface colour - excellent water vapour breathability - elevated pearl effect - resistance to acids and alkalis - resistance to UV rays - an absence of reactive by-products that are harmful to people and the environment impregnating, hydro-oil repellent, non-film, totally transparent, colorless treatment of FLOORTECH PRERIT washed gravel architectural floors. Packaging: 5 kg can UM: €/kg

Armaglass Connector Twin Alkali-resistant fibreglass connector with rigid pre-formed central segment and double-threaded ends. Suitable for the structural reinforcement of brickwork, arches and vaults in masonry, tuff and stone, in combination with ARMAGLASS STRUCTURA fibreglass mesh and mortars such as Unisan, Intosana and the REPAR family. It is used as a conduit for connecting the two sides of structural plaster (with the “structural sandwich” technique). Armaglass Connector Twin is mainly used in plastering reinforced with sandwich systems comprised of mortars and fibreglass mesh. The rigid central section is available in segments of different lengths (200, 300, 400, 500 or 600 mm), while the two threaded ends are fixed at 200 mm in length. The ends are thus able to be opened radially and form an anchorage area of 400 mm in diameter. This method of connecting the two sides of the structural sandwich requires low-invasive preparatory operations, being easy to carry out and consequently resulting in low installation costs. The Armaglass Connector Twin is used to reinforce masonry, arches and vaults in brick, tuff and stone. It is used as a through-connection for joining two sides of a structural plastering . Packaging: bulk - 20x20x20 Unit of Measure: €/piece

Fluid Spritz Solution of mineral reactives (sodium silicate) to be used for the acceleration of setting of sprayed masonry and projected concretes, in the reinforcement of rocks outdoors and/or in a gallery, in laying self-sustaining and waterproofing claddings of tunnels, channels, vaults, basins, underground structures, etc., for use with specific equipment for hydrated mixtures (mixtures in which the silicate is sprayed on the shotcrete output nozzle). Fluid Spritz is a wide diffusion accelerant characterised by ease of use, dosage variability according to the specific construction needs: reduction in the number of coating layers to be applied, reduction of patch layer laying time, reduction of rebound swarfs, option to operate even in cold weather. Production of mortars and grouts sprayed with specific equipment (pumps for shotcrete machines) for hydrated mixtures in the reinforcement of rocks outdoors and/or in a gallery, in laying claddings, also with a load-bearing function, in galleries, on piles, sheet piles, diaphragms, channels, vaults, pondage, etc. In waterproofing underground structures. It can be used in structural sheets, for the safety of buildings affected by earthquakes. Fluid Spritz must be previously introduced into a tank of suitable capacity to be added directly to the spray nozzle. It is always advisable to carry out preliminary tests to determine the most appropriate percentage product addition. Packaging: 1350 kg tank UM: €/kg

Floor Tenax is a pourable, plastic/fluid, fibre-reinforced mortar for use in repairing deteriorated concrete flooring (with a reconstruction thickness from 4 mm to 20 mm) along with structural repairs of reinforced concrete cast in formwork. The formulation contains very fine yet high-strength cements, microsilica compounds with pozzolanic activity, rational granular aggregate composition curve (0.1–1.8 mm), special additives and a substantial amount of READYMESH fibre reinforcement. The product mixes with very low water/binder ratios (<0.32). The special formulation of Floor Tenax confers mechanical strength, fracture energy, exceptional durability and very high chemical-physical resistance to the repairs performed. Packaging: 25 kg bag UM: €/kg

Grout 6 SFR Grout 6 SFR is a high-performance, self-levelling castable mortar, reinforced with Readymesh MM-150 steel fibres and 6 mm Readymesh PM-060 polypropylene microfibres. It boasts high flexural strength, excellent adhesion to concrete and steel, and shrinkage compensation. The aggregates have a maximum size of 6 mm. It is ideal for anchoring road joints, restorations, reinforcements, and seismic adjustments, providing ductility for medium-to-high thicknesses (5–20 cm) on structures made of reinforced concrete and masonry. Structural restoration and adjustments, recovery and anchoring of road, motorway, airport joints, and critical area joints in general. Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust, etc., and adequately saturated with water until they reach the condition "saturated with dry surface". Proper roughening of the surfaces through scarifying, sandblasting, etc., is always necessary to achieve maximum adhesion values to the substrate. Optimal values are obtained with high-pressure hydro-scarification. Remove any exposed rebar that is undergoing disruptive oxidation or is deeply oxidized, cleaning the rust from the exposed rebar (by sandblasting or using abrasive brushes). Pour about 2/3 of the mixing water into the mixer, add Grout 6 SFR and the remaining water; continue mixing until a homogeneous, lump-free mixture is achieved. The mixing water should be about 13%-15% by weight (3.5-4.5 litres per bag). Use casting procedures that ensure the absence of discontinuities and avoid the formation of air pockets. For high anchoring sections, it is advisable to add Ghiaietto 6.10 (please refer to the appropriate technical data sheet for more information). Packaging: 25 kg bag Unit of Measure: €/kg

Protech Sil P Therm white Anti-condensation, elastic, sanitizing, heat-reflecting paint, with hollow glass microspheres (3M Glass Bubble), ideal for both external and internal facades, based on siloxane resin in emulsion, with high permeability to water vapor and with excellent covering power. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana). Protech Sil P - Therm is a paint suitable for any type of mineral substrate, such as old and new plasters, synthetic plasters, sandstone walls, etc. For old emulsion paints, remove non-adherent parts, remove any impurities, repair any cracks or crevices and then consolidate everything with Protech Fix AC - Therm, a silicon water repellent fixative primer, also suitable for highly alkaline substrates. Protech Sil P - Therm has excellent covering power: class 1 according to EN 13300 for a yield of 6/7 m2/l. In addition to the painting of external facades and internal environments, Protech Sil P-THERM has been designed especially for buildings and monuments subject to the protection of the ministry of cultural heritage. The binder based on an emulsion of silicones has allowed to develop a microporous filter impermeable to heavy rain, and at the same time permeable to the diffusion of water vapour. The great advantage of this paint is that it can be applied both on mineral (inorganic) supports and on previously treated supports with emulsion-based paints, creating a physical adhesion, with extremely microporous films. The particular chemical structure of the silicone binder produces a film resistant to light and atmospheric agents that is not destroyed even by microorganisms. For old emulsion paints, remove non-adherent parts, remove any impurities, repair any cracks or crevices and then consolidate everything with Protech Fix AC - Therm, a silicon water repellent fixative primer, also suitable for highly alkaline substrates. SUPPORTS ALREADY PAINTED WITH SILICATE PAINT Remove any stains and proceed with painting with the siloxane paint. (it is always recommended to apply a coat of siloxane impregnating agent). NEW SUPPORTS Apply a coat of siloxane acrylic fixative diluted from 20 to 60% with water depending on the absorption of the support. OLD SUPPORTS On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with siloxane impregnating agent diluted 20 to 60% with water depending on the absorption of the support. On large surfaces, it is recommended to apply the product of the same lot and proceed always wet on wet to avoid signs of resumption. Never operate at temperatures below + 5°C. Rainy weather, excessive atmospheric humidity and temperatures below + 8°C, can considerably compromise drying with the possibility of rainwater washout even after several days. In these situations, it is advisable to protect the facades from unpredictable showers, in order not to jeopardize the success of the work. For storage store in tightly closed containers and protect from frost. Packaging: 4-liter bucket UM:€/l

Consilex Inject Mauer One-component silane-based system modified for the preparation, with the sole addition of water, of water repellent microemulsions for slowly spreading masonry injections against capillary rising damp or using a pump with low operating pressure (0.5 to 1.5 bar), specific for the construction of chemical barriers in masonry, brick, tufa, stone and mixed, of varied thicknesses. The injection of Consilex Inject Mauer can be made using a pump with low operating pressure (0.5 to 1.5 bar) or else via drop-down and slow diffusion using special graduated bags (Barrier Bag) and injection tubes (Barrier Tube D26). The slow diffusion, carried out with the accessories mentioned above is specifically designed to facilitate the deep and complete interpenetration of the formulation into the porosity of the material, even without mechanised pumping systems being set up. Being deprived of its source of damp, the masonry above the operation will gradually and slowly yield its residual moisture content by evaporation. Since this process can crystallise the salts contained in the masonry, bleaching and saline efflorescence effects may occur on the surface of the exposed masonry or plaster with accentuated phenomena of superficial degradation. Thus, for plastered masonry that has become compromised, completing a cycle of dehumidifying plastering is recommended, using Untersana, Sanatigh or Sanastof for example. For exposed masonry, it is recommended to allow the salts to vent throughout the summer period and then, if necessary, complete the operation with a water-based surface water repellent treatment such as Consilex Altrain WV. Construction of slow diffusion chemical barriers or using a pump with low operating pressure (0.5 to 1.5 bar) against capillary rising damp in brickwork, tufa, stone and mixed, of varying thickness. In the event that injection is performed with pumping systems, the hole usually has a diameter of 12 mm, being able to accommodate the rubber and steel injector. If the injection is carried out by slow diffusion, the drill bit must be 30 mm to permit the insertion and housing of the Barrier Tube D26 cardboard tubes, connected externally via the specific polyethylene Barrier BagS and their tubes, as better described in the product data sheets. Pour the prepared mixture into the mechanised pumping system or fill the previously-prepared containment Barrier BagS until the quantity of the necessary mixture has been completely absorbed. In normal absorption conditions, masonry with a thickness of about 40 centimetres will soak up about 16 litres of the 1:10 solution for each metre in length. Once fully absorbed: - if using pumping systems, remove the injectors and putty the holes; - if using the drop-down system, remove the bags and tubes installed, leaving the cartridges “to be lost” in the holes, which will then need to be properly filled completely and puttied on the surface with cement- and/or lime-based mortar. Packaging: 10-liter can UM:€/l

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Filtene Fondogiunto Closed cell polyethylene foam kerb, compressible, to properly size the depth of the expansion joints (creation of the "third wall" or base material) before filling them with the polymeric sealants Protech Flex, PROTECH SIGILFLEX MONO or EG 91. It is available in profiles of circular cross-section of different diameter that will fit joints of any shape and size. Suitable for any type of joint between prefabricated elements, infills, bodies of different structures, partitions, doors and window frames, flooring. The insertion of a "joint base" filler material has many functions in both static and expansion joints: sizing the joint in the most appropriate shape and measurements for the characteristics of the sealant to be used, reducing the stresses internal to the sealant itself and on the adhesion to the walls; favouring the contact of the sealant with the side walls during joint filling; reducing sealant consumption. Filling the "joint base" for any type of joint between prefabricated elements, infills, bodies of different structures, partitions, doors and window frames, flooring, prior to laying the elastic sealant in the joint itself. The diameter of Filtene Fondogiunto should be about 25% greater than the width of the joint to allow a stable positioning of the profile and create sufficient resistance to the pressure exerted by the sealant during extrusion. Push with a tool with a rounded tip (free of sharp and pointy edges), capable of crossing the width of the joint, Filtene Fondogiunto, up to the desired depth and so as to leave on the surface an adequately deep seat for the subsequent sealant. Normally the depth of the sealing should be about half the width of the joint. Polyethylene foam is unaffected by solvents contained in the primers, but it is a good idea never to apply the adhesion promoter Protech Flex Primer on Filtene Fondogiunto, in order not to alter the anti-adherence properties. FILTENE can then be inserted into the joint after applying the primer, when the "dust-free time" is attained. A good rule is for the depth of the sealing (adjustable depending on the positioning of Filtene Fondogiunto) not to exceed the width of the joint itself. Confezione: Rotolo da 25 metri UM: €/m

Fluid SRA Concentrated liquid additive formulated to reduce shrinkage in the plastic phases of cement mortar. It reduces shrinkage by over 50% compared to the same mixture without the additive, especially when curing conditions are not possible in a humid environment. Excellent in combination with anti-shrinkage and structural fibers for achieving high structural performance works. It can be used in certain thixotropic and castable structural mortars of the REPAR and GROUT families according to the quantities specified in the respective technical data sheets. For mortars with high volumetric stability. Reduces cracking caused by shrinkage in the plastic phases of cement mortar. Reduction of free air shrinkage in some structural mortars of the REPAR and GROUT families (particularly useful when wet curing conditions for structural mortars are not feasible). Fluid SRA must be added to the mortar after adding the mixing water to the cement mixer. After addition, mix thoroughly before casting. The typical dosage for normal use is approximately 1% relative to the weight of the binders. Packaging: 1 kg bottle UM: €/kg

Consilex ST Transparent penetrating consolidator, for natural stones, ornamental stone elements, mineral plasters and in general for the restoration of cultural heritage. It consists of ethyl esters of silicic acid in solvent, hardening by reaction with atmospheric humidity. It is applied by spraying at low pressure, until the treated surfaces are rejected, in order to guarantee an extremely deep consolidation. Packaging: 5-liter can UM: €/l

Floor Level Floor Level is a self-levelling modified-polymer cement mortar with fibre-reinforcement, offering accelerated grip and fast hardening. Applied prior to laying the flooring, it is perfect for levelling at thickness ranging from 3 mm to 20 mm so as to adapt to any type of covering. Floor Level is a self-levelling modified-polymer cement mortar with fibre-reinforcement, offering accelerated grip and fast hardening. Applied prior to laying the flooring, it is perfect for levelling at thickness ranging from 3 mm to 20 mm so as to adapt to any type of covering. Floor Level is a self-levelling modified-polymer cement mortar with fibre-reinforcement, offering accelerated grip and fast hardening. Applied prior to laying the flooring, it is perfect for levelling at thickness ranging from 3 mm to 20 mm so as to adapt to any type of covering. Packaging: 25 kg bag UM: €/kg

Protech Balcony Solution based on special silane and siloxane resins in solvent, highly penetrating, transparent (colourless), for quickly, effectively and economically waterproofing balconies, tiled terraces, concrete roofings, external stairs, etc., without removing or intervening on the existing flooring. It does not change the appearance of the support on which it is applied and it does not alter the original slipperiness or its water vapour breathability. It is quick to apply and does not require skilled labour or professional equipment. The flooring treated will be usable after only 2 hours of laying. Protech Balcony is a product that is easy and quick to apply: simply spread it out with a scrubbing brush on clean and dry surfaces to solve the problem of infiltration. The active ingredient, effectively conveyed in a solvent, it penetrates fillings, substrate cracks and porosity rapidly and in-depth. Upon contact with air, it performs a polymerisation reaction that seals and waterproofs, perfectly and in depth, all discontinuities where it has managed to penetrate. After the reaction, the specific polymerised siloxane molecule is stable over time and does not labilise. Thus, the effective life of the product being applied on surfaces which are not subject to dynamic movements and seismic activity, is normally in excess of 10 years. If necessary, if new discontinuities, cracklings, cracks, fissures etc. appear after the first application of Protech Balcony, these may conveniently be resolved with a second application of the product. Given its intrinsically non-pellicular nature, the product will not be subject to fissures, tears, cracks, separations, deterioration and will not yellow over time, under the effects of UV rays (as occurs naturally for epoxy and/or polyurethane treatments). The surfacings treated with Protech Balcony will be resistant to mildew, moss, lichens and other biodeteriogenic bodies. Please note that the effectiveness in terms of water repellence, and watertightness of Protech Balcony has been certified with suitable tests conducted at the laboratories of the department of structural engineering of POLITECNICO DI MILANO (the Polytechnic of Milan). Quick waterproofing, of balconies, terraces, stairs, decks, tiled surfaces, concrete structures, and natural stones, without demolishing the existing flooring. Also for use on vertical surfaces particularly exposed to the inclemency of the weather and atmospheric agents (tiled, plastered, exposed brickwork, etc.). The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. The vanishing points between tiles, if present, should be appropriately treated with suitable acid or alkali cleaners. In this respect it is recommended that the specific acid detergent Deterg-A, diluted with water at a ratio of 1:4. Rinse the treated surfaces with running water. Labile and non-adhering vanishing points, possibly removed, are required to be restored with high adhesion and deformability cement surfacers. In this respect it is advisable to use of the specific two-component waterproof and deformable filler Stucco Balcony. Wait for the necessary time (1-2 days) for drying the filling before applying Protech Balcony. Any expansion joints present, including those relating to the junction line of the tiled flooring and the perimeter kerb (typically made of granite or natural stone), will have to be sealed with high elasticity polymeric materials. In this respect, it is advisable to seal them with Protech Flex, assisted by laying Filtene Fondogiunto and the appropriate polyurethane primer Protech Flex Primer. Pour small amounts of product at a time and spread it evenly over the entire surface with a scrubbing brush or a "water squeegee", until complete impregnation of the support to be waterproofed. Set Protech Balcony with all due care in less accessible and more uncomfortable areas, by using a brush with long bristles or a sponge (edges, skirting boards, corners, sills, wells, chimney flues, discharges, etc.). Allow the product to penetrate for at least 60 minutes. Within maximum 120 minutes of application, remove the excess product on all surfaces treated with a cloth soaked in the diluent Nitro. The product consumption is on average about 0,125 l/m² of surface to be waterproofed; varying according to the absorption of the support and the size of any vanishing points. Normally it is considered that with 1 litre of Protech Balcony you can treat from 7 to 15 m² of surfaces. Packaging: 2-liter can UM: €/l

Fluid Therm Multi-purpose Additive solution specific for the improvement of thermal conductivity of concretes, through balanced superlubricating, defoamer, plasticiser type actions. Fluid Therm is perfectly compatible in combination with steel Readymesh MM-150 (usually dosed at 25 kg/m³) or multifilament Readymesh PM-180 (usually dosed at 1 kg/m³) polypropylene fibres In radiant panel heating systems , the presence of high air content in the concrete forming the levelling screed can cause the correct spread of thermal energy to be severely obstructed; on the other hand, the conglomerate incorporates air already in the mixing phase in the form of microbubbles, while the excess mixing water and the segregation mechanisms that occur during transport and casting contribute to including additional quantities of air in the form of macrobubbles in the conglomerate. In this context, the peculiar defoamer, superlubricating and antisegregative actions of Fluid Therm, are particularly valuable as they allow the production of grouts and concretes with very low air content. Packaging: 10 kg canister UM: €/kg

Syntech Roadware Syntech Roadware is a high penetration two-component hybrid urethane which, combined with quartz, produces a hard and instant polymer to repair cracks and crevices in concrete floors. Syntech Roadware has a very low viscosity allowing the penetration of the product in depth, even in the narrowest cracks. It has short reaction times, in fact in 10 minutes at 20°C the material polymerizes completely and catalyzes quickly even in environments with temperatures below 0°C. It has good resistance to chemical attack. When combined with quartz powder, Syntech Roadware, forms a highly resistant compound with properties similar to existing concrete but with the flexibility that persists over time. Repair of splits or cracks in concrete, restoration of deteriorated concrete degradation, repair of cracks and pop-out phenomena in concrete. Slightly widen the crack with a circular saw to facilitate the penetration of Syntech Roadware. Before applying the product, vacuum the dust created. The support must be clean and free from dust or dirt. Apply Syntech Roadware directly on the crack or on the degraded area until the gap is completely saturated. Add quartz directly to the crack and repeat the Syntech Roadware application operation. Smooth with a spatula and leave the product to work. With a Syntech Roadware cartridge, an average of 50 linear metres of gap of 5 mm width is repaired. Bi-mix cartridge 600 ml